Protect and enhance marble surfaces with UV-curable varnishes designed for both high gloss and semi-matte finishes. This formula, developed by Sinocure Chemical Group, ensures excellent adhesion, scratch resistance, and durability, making it ideal for architectural, decorative, and industrial applications.
| Product & Link | Description | Dosage (%) |
|---|---|---|
| SINOMER® UVA1130 | Pure acrylate oligomer | 30 |
| SINOMER® UVE3269 | Modified epoxy acrylate | 12 |
| SINOMER® UVE3267 | Modified epoxy acrylate | 15 |
| SINOMER® TMPTA | Trifunctional monomer | 30 |
| SINOMER® UVC8003 | Phosphate acrylate (adhesion promoter) | 1 |
| SINOCURE® 184 | UV photoinitiator | 3.5 |
| AgeSin® LA-D5433 | Polyether-modified silicone leveling agent | 0.3 |
| Product & Link | Description | Dosage (%) |
|---|---|---|
| SINOMER® UVA1130 | Pure acrylate oligomer | 30 |
| SINOMER® UVE3269 | Modified epoxy acrylate | 12 |
| SINOMER® UVE3267 | Modified epoxy acrylate | 15 |
| SINOMER® TMPTA | Trifunctional monomer | 30 |
| SINOMER® UVC8003 | Phosphate acrylate | 1 |
| SINOCURE® 184 | UV photoinitiator | 3.5 |
| Matt Powder | Matte additive | 8 |
| Fumed SiO₂ | Rheology modifier | 0.5 |
| AgeSin® LA-D5433 | Leveling agent | 0.3 |
| Parameter | Result |
|---|---|
| Thinning Ratio | 10:6 (Resin to Solvent) |
| Curing Conditions | 70°C Bake + 800 mJ/cm² UV Exposure |
| Adhesion | Excellent (ASTM D3359) |
| Boiling Water Resistance | Passed 100°C, 1 hour immersion |
| Scratch Resistance | High durability (1kg load, 1,000 cycles) |
| Gloss Level | Semi-Matte: 20 GU (60° measurement) |
Versatility: Adjust gloss levels from high shine to semi-matte by incorporating matting agents.
Durability: Resists water, scratches, and thermal stress for long-lasting marble protection.
Fast Curing: Achieves full cure in minutes under UV light, boosting production efficiency.
Surface Preparation: Clean and dry marble substrates thoroughly.
Mixing: Blend components in order, ensuring homogeneous dispersion.
Spray Application: Use HVLP sprayers at 25–30 psi for even coating.
Curing: Pre-bake at 70°C for 3 minutes, followed by UV exposure (800 mJ/cm²).
Need a tailored formula? Contact our team for:
Alternative matting agents (e.g., wax-based additives).
Low-VOC formulations compliant with global regulations.
Enhanced adhesion for challenging substrates.
Explore our products:
SINOMER® Oligomer/Resin | SINOMER® Monomers | SINOCURE® Photoinitiators | AgeSin® Additives
Sinocure Chemical Group
No. 61, South Industrial Road, Jinan Area of Shandong Pilot Free Trade Zone, China
+86 15668330235 | ✉️ info@sinocurechem.com
Innovating Coatings for Sustainable Surfaces
