AgeSin® LA-D5435 is a Leveling Agent with Polyether modified polydimethyl siloxane.Can completely replace BYK-333 (D5435 has better anti-cratering ability but not suitable for Water-based system.).
AGESIN® Polyether modified polydimethyl siloxane
Product Number: AgeSin® LA-D5435
Equivalent alternatives: BYK-333 (D5435 has better anti-cratering ability but not suitable for Water-based system.)
| Composition | Polyether modified polydimethyl siloxane |
| Appearance | slight yellowish clear liquid(paste at low temperature) |
| Solvent | —— |
| Density | 1.01-1.05g/ml(25±1)℃ |
| Viscosity | 25-60s(Tu-4 viscometer)(25±0.2)℃ |
| Active substance | 100% |
| Flash point | ＞100℃ |
This data sheet is intended to give typical results, not standard.Subject to COA.
● Solvent-based, UV Cure
● Good compatibility in varnish.
● Provide a stronger reduction of the surface tension.
● Reduce the friction coefficient. Increase slip and improve scratch resistance.
● Good recoating and minimal influence on adhesion of coating films at suitable addition and baking temperature.
● Excellent property of anti-crater. Commonly used to replace oil-resistant agent, do not affect the environment and recoatability.
● Not suit for water-based.
● Hazy and viscous may occure at low temperatures. It would become clear and flow after heated. This will not influence the quality.
Add with suitable solvent. Can add in any stage during the production including post-addition.
Suggest addition
Addition to total formulation 0.05-0.5%
● 25KG / 180KG
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
Protecting the product from leakage, rain and insolation during transportation.
Ofrecemos una variedad de opciones para ayudarle a encontrar el producto adecuado para su aplicación.
Proporcionar apoyo en la optimización de formulaciones para sistemas a base de agua/solventes
Cobertura completa de las normas REACH, FDA y GB
99,8% de tasa de entregas a tiempo, garantía de capacidad de producción de 10.000 toneladas
