AGESIN® Polyether modified polydimethyl siloxane
Product Number: AgeSin® LA-D557
Equivalent alternatives: DOW CORNING 57
| Composition | Polyether modified polydimethyl siloxane |
| Appearance | slight yellowish clear liquid(paste at low temperature) |
| Solvent | —— |
| Density | 1.01-1.05g/ml(25±1)℃ |
| Viscosity | 25-60s(Tu-4 viscometer)(25±0.2)℃ |
| Active substance | 100% |
| Flash point | ＞100℃ |
This data sheet is intended to give typical results, not standard.Subject to COA.
● UV Cure
● Provide a slight reduction of the surface tension.
● Reduce the friction coefficient. Increase slip and improve scratch resistance.
● Good recoating and minimal influence on adhesion of coating films.
● Hazy and viscous may occure at low temperatures. It would become clear and flow after heated. This will not influence the quality,
Easy to add with pre-diluted solvent the same as that in the coating system. Can post-addition.
Suggest addition
Addition to total formulation 0.01-0.5%
Storage stability
Keep intact 24 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediatelyafter use.
Transparency in varnish : 4
Defoaming : 0
Dynamic surface tension : 4
Static surface tension : 2
Slip : 3
Prevent orange peel : 1
0=unavailable 5=very effective
● 25KG / 180KG
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
Protecting the product from leakage, rain and insolation during transportation.
Ofrecemos una variedad de opciones para ayudarle a encontrar el producto adecuado para su aplicación.
Proporcionar apoyo en la optimización de formulaciones para sistemas a base de agua/solventes
Cobertura completa de las normas REACH, FDA y GB
99,8% de tasa de entregas a tiempo, garantía de capacidad de producción de 10.000 toneladas
